How to Flash a StockRom in Samsung With Odin Tools

How to Flash a StockRom in Samsung With Odin Tools

How to Flash a StockRom in Samsung With Odin Tools, These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on a windows computer.

Requirements:-Your Samsung Smartphone should have at least 30-40 percent of battery to perform the flashing.

Step 1: Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step

.

Step 2: Download (Stock ROM compatible with your device or if you have already downloaded the firmware then ignore downloading it again) and extract it on your computer. After extracting you will be able to see these kinds of files

Step 3: Power Off your Samsung Device.

Step 4: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold (VolumeDown +key+Home Key+Power Ke) Together. When the phone vibrates Leave the Power Key but Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.

How to Flash a StockRom in Samsung With Odin Tools

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume up key to continue.

Step 6: Download and extract Odin on your computer. After extracting you will be able to see the following files,

Step 7: Now, Open Odin3 and connect your phone to the computer with the USB cable.

Step 8: Once you have connected the phone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.

Step 9: when your device detected by Odin, click on “PDA” and insert the tar.md5 file that you have extracted from StockRom Zip file.

Step 10: Now click on the Start button, if you getting fail, then do this,

1.Switch on your device,

2.Goto setting 

about device click 5 to 6 time on the build number.Press back button one time you can find developer option.

3.Enable developer option,

4.then Enable OEM to unlock you can find OEM unlock option inside the developer option, go back Switch off your device go into download mode,

5.connect your phone via USB Odin detect then click on start button.

Step 11: Once you see, the green pass message then Remove the USB cable (After flashing your device Automatic Restart)

  

Step 12: If Your Samsung Device will now be stuck at boot (boot loop). Now, You have to boot into Stock RecoveryMode, to enable stock recovery mode Press and hold “VolumeUp key+HOME+Power Button together at least 5 to 9 second When Phone vibrates leave power key but keep press volume up key, You will boot into the Recovery mode.

Step 13: In recovery mode, Wipe data/ Factory Reset.

Step 14: once catch data is cleared.

Select restart phone now From the Recovery Menu.

Now we have successfully Flash a StockRom in Samsung With Odin Tools

Now your device starts with  New StockRom Without any Issue, if have any query comment below Than you.

4 thoughts on “How to Flash a StockRom in Samsung With Odin Tools

  1. Hey, I have note 5 920c ,no Indian firmware available so I select Cambodia VER and installed it . now volte showing in upper notification panel but no calls passing .kindly help me use VOLTE I my galaxy note5

    Thanks and regards

Leave a Reply